Panasonic LP-M Series, Maintenance Manual

Page: 11 / 174

11
How to Read this Document
„
Symbol indications
ワㄐㄕㄊ㄄ㄆ
“Notice” denotes any instructions or precautions for using this product. To prevent the damage or
malfunction of the product, observe these precautions fully.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
“Reference” denotes any hints for operation, detail explanations, or references.
„
Type of manuals
For this product, the following manuals are prepared. Read each manuals and operate this product correctly and safely.
Save the manuals for future use.
Safety / Setup / Maintenance Guide
This manual describes the safety precautions and the items required for the introduction, installation and maintenance of
this product.
• Precautions and safety measures: All users shall be required for reading this part.
• Specifications and outer dimensions
• Setup and connecting method
• I/O control method (signal layout, I/O rating, timing chart etc.)
• Maintenance
• Troubleshooting
Operation Manual
This manual describes how to operate the laser marker and set the marking data using touch panel console or monitor
and mouse.
Laser Marker NAVI plus Operation Manual
This manual describes how to operate the laser marker and set the marking data using PC setting software “Laser
Marker NAVI plus”.
Serial Communication Guide
This manual describes the communication commands to control this product externally using the serial communication
(RS-232C/Ethernet). It describes the communication conditions, communication data formats, communication
commands, and the control samples.
Mainly the machine builder and system integrator shall be required for reading this manual.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• The PDF data of each manual is included on an attached CD-ROM “Laser Marker Utility”.
• To read the PDF manual, Adobe Reader (Version X or later) of Adobe Systems Incorporated is required.
ME-LPM-SSM-10