Panasonic LP-M Series, Maintenance Manual

Page: 32 / 174

32
*4 : Average output power from the laser marker at delivery time with the maximum laser power setting.
*5 : The laser gate is equipped only in LP-Mxxx-S type.
*6 : For using SQRC, an extra-cost software is needed. SQRC marking function is available only for use in Japan.
*7 : VEC is a usable format of graphic file for laser marker. To use HPGL, BMP or JPEG files, convert them to VEC format
with the attached “Logo Data Conversion software”. To use AI or EPS files, convert them to VEC format with the
attached software “ExportVEC”.
*8 : Check the operation before use. Use a USB flash drive formatted with FAT32. USB media with security features
cannot be used.
*9 : OS versions of which Microsoft has ended support are excluded.
*10 : The power voltage is auto-switched.
*11 : The typical value of the inrush current at system startup is as follows. (Duration time is 10 ms or less.)
100V AC: 80A / 200V AC: 160A
*12 : This specification is applied to both head and controller. No condensation and freezing shall be allowed. If there is
a gap between the stored temperature and operating temperature, make sure to have the product get used to the
operating ambient temperature gradually prior to use to prevent the dew condensation.
*13 : Area where the electronic parts and optical parts of the head are situated is the proof characteristic part of IP64.
ME-LPM-SSM-10