Panasonic KX-NCP500, Manual Manual

Page: 331 / 376

extension user that there is a message waiting in his mailbox. When the Message button light turns on,
pressing the button allows the extension user to play back the messages stored in his mailbox without
dialing such as a mailbox.
When the extension user dials an extension number of the VM (DPT) extension port or the floating
extension number of the VM (DPT) group from his extension, he can listen to the messages stored in his
mailbox without dialing his mailbox number (Direct Mailbox Access). It is possible to disable this feature
by COS programming on the VPS.
7.
VPS CO Line Service & Automatic Time Mode Notification for Incoming Call
*1
Multiple tenants can share a single VPS; each tenant does not require a dedicated VPS port. If the
destination of the incoming CO line call is a VM (DPT) group, the PBX sends the VM trunk group number
and time mode (day/lunch/break/night) of the tenant (
®
17.1.5 Time Service) assigned for the call to the
VPS. Therefore the VPS can send the assigned message (company greeting) to the caller. Corresponding
VM trunk group number and tenant number are determined by the setting of the incoming CO line call as
follows:
a.
DIL/TIE: the setting of each CO line port (
®
4.1.7 DIL (Direct In Line),
®
13.1.15 PRIVATE NETWORK
FEATURES)
12.2 [10-2] DIL Table & Port Settings—DIL
→
Tenant Number
→
VM Trunk Group No.
b.
DID: the setting of each location number for DID (
®
4.1.6 DID (Direct Inward Dialing))
12.3 [10-3] DID Table
→
Tenant Number
→
VM Trunk Group No.
[Example]
For DIL Calls:
Document Version 2009-12 Feature Manual 331
19.1.4 Voice Mail DPT (Digital) Integration