Panasonic KX-NCP500, Manual Manual

Page: 117 / 376

In the above cases, the forwarding counter resets to zero, and the call can be forwarded up to four times
again from the destination extension described above.
Original
destination
Incoming
call
A B C D E F
1 2 3 2 1
FWD—No Answer
•
Boss & Secretary feature
It is possible to call the original extension from the destination extension regardless of the forward setting.
FWD—All Calls
Call or
transfer a call
Boss
(Original)
Secretary
(FWD destination)
Incoming
call
•
Message Waiting
While calls are forwarded, Message Waiting information is not forwarded. The Message button light turns
on at the originally called extension. (
®
11.1.3 Message Waiting)
•
Idle Extension Hunting
Idle Extension Hunting applies to calls forwarded to a busy extension in an idle extension hunting group.
[All Calls and Busy]
•
If the forward destination is not available to answer a call, this feature is canceled and the original
destination will ring for the following type of call:
–
Doorphone call
–
CO line calls via the LCOT or T1 (LCOT/GCOT) cards
[No Answer and Busy/No Answer]
•
No Answer Time
The number of rings before the call is forwarded is programmable for each extension.
[Follow Me]
•
This feature is only available when the original extension has set " Remote Operation by Other
Extension " to "
Allow
" through COS programming.
PC Programming Manual References
4.9 [2-6-1] Numbering Plan—Main—Features— FWD No Answer Timer Set
4.12 [2-7-1] Class of Service—COS Settings
→CO & SMDR— Call Forward to CO
→Programming & Manager— Group Forward Set
→Optional Device & Other Extensions— Remote Operation by Other Extension
5.1 [3-1-1] Trunk Group—TRG Settings—Main
→ CO-CO Duration Time (*60s)
→ Extension-CO Duration Time (*60s)
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
6.3 [4-1-2] Wired Extension—FWD/DND
6.12 [4-2-2] Portable Station—FWD/DND
Document Version 2009-12 Feature Manual 117
6.1.6 FWD (Call Forwarding)