Panasonic KX-NCP500, Manual Manual

Page: 59 / 376

PC Programming Manual References
4.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
→ Unattended Conference—Recall Start Timer
→ Unattended Conference—Warning Tone Start Timer
→ Unattended Conference—Disconnect Timer
4.12 [2-7-1] Class of Service—COS Settings—CO & SMDR— Transfer to CO
4.18 [2-9] System Options—Option 3
→ Confirmation Tone—Tone 4-1 : Start Conference
→ Confirmation Tone—Tone 4-2 : Finish Conference
→ Echo Cancel—Conference
6.5 [4-1-4] Wired Extension—Flexible Button— Type
6.13 [4-2-3] Portable Station—Flexible Button— Type
6.17 [4-3] DSS Console— Type
Feature Manual References
6.1.3 Flexible Buttons
21.1 Capacity of System Resources
Operating Manual References
1.3.15 Conference
3.1.19 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone
to extension users.
Type Description
Tone 1
a.
Sent when the setting is accepted.
b.
Sent when a call is received in voice-calling mode (Alternate Receiving—
Ring/Voice). The caller’s voice will be heard after the tone.
Tone 2 a.
Sent from an external paging device or an extension before being paged.
b.
Sent when a call is received while an extension is in Hands-free
Answerback mode.
Tone 3-1 a.
Sent before a conversation is established when using the Paging feature.
b.
Sent to the caller when a conversation is established with an extension in
one of the following modes:
•
Hands-free Answerback mode
•
Voice-calling mode (Alternate Receiving—Ring/Voice)
c.
Sent when making a call to or from a doorphone.
Document Version 2009-12 Feature Manual 59
3.1.19 Confirmation Tone