Panasonic KX-NCP500, Manual Manual

Page: 168 / 376

Conditions
•
En bloc
The PBX sends all of dialed digits at once after the extension user completes dialing. The PBX recognizes
the end of dialing as follows:
–
the # key is pressed (programmable).
4.18 [2-9] System Options—Option 2—
End of Dial Plan—[#] as End of Dial for en Bloc mode
–
the dialed number is a preprogrammed telephone number.
5.4 [3-1-4] Dialing Plan
–
the inter-digit timer expires.
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Extension Inter-digit
•
Extension Number
An extension number can be assigned to each ISDN port.
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
Extension Number
•
Network Type
Each ISDN port can be set to the requirements of each country/area.
•
L1 Active Mode and L2 Data Link Mode
The active mode of Layer 1 (L1) and the data link mode of Layer 2 (L2) can be selected individually
(Permanent or Call by Call) for each ISDN port.
•
TEI Assignment Mode
The Terminal Endpoint Identifier (TEI) assignment mode can be selected for each ISDN port.
•
Bearer Mode
The bearer mode can be assigned for each ISDN port.
6.1 [4-1-1] Wired Extension—Extension Settings—Option 7—
ISDN Bearer
6.10 [4-2-1] Portable Station—Extension Settings—Option 7— ISDN Bearer
PC Programming Manual References
3.30 [1-1] Slot—Card Property - PRI type
3.31 [1-1] Slot—Port Property - PRI Port
3.32 [1-1] Slot—Port Property - PRI Port—Connection Command
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Extension Inter-digit
4.18 [2-9] System Options—Option 2— End of Dial Plan—[#] as End of Dial for en Bloc mode
5.5 [3-1-4] Dialing Plan—Auto Assign
6.1 [4-1-1] Wired Extension—Extension Settings
→Main— Extension Number
→Option 7— ISDN Bearer
6.10 [4-2-1] Portable Station—Extension Settings—Option 7— ISDN Bearer
Feature Manual References
13.1.20 PRIVATE NETWORK FEATURES—QSIG
168 Feature Manual Document Version 2009-12
9.1.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES