manualshive.com logo in svg

Panasonic KX-NCP500, Manual Manual

The Panasonic KX-NCP500, a versatile communication system, allows businesses to streamline their operations. Unlock its maximum potential by accessing the comprehensive programming manual. Download it for free from our website to effortlessly configure and customize your KX-NCP500, maximizing productivity and efficiency for your organization.

Share
Download
background image

d.

Is on a conference call (

®

 3.1.18  Conference, 

®

 13.1.14  Privacy Release).

e.

Is on a doorphone call (

®

 4.1.12  Doorphone Call).

f.

Is using Live Call Screening (LCS) or Two-way Record (

®

 19.1.4  Voice Mail DPT (Digital)

Integration).

g.

Has a call on consultation hold (

®

 4.1.8  DISA (Direct Inward System Access)).

•

This feature is not available for a CO-to-CO line call via Direct Inward System Access (DISA).

PC Programming Manual References

4.9  [2-6-1] Numbering Plan—Main—Features—

Executive Override Deny Set / Cancel

4.11  [2-6-3] Numbering Plan—B/NA DND Call Feature—

Executive Busy Override

4.12  [2-7-1] Class of Service—COS Settings

→Extension Feature—

Executive Busy Override

→Programming & Manager—

Executive Busy Override Deny

6.1  [4-1-1] Wired Extension—Extension Settings—Option 3—

Executive Override Deny

6.10  [4-2-1] Portable Station—Extension Settings—Option 3—

Executive Override Deny

PT Programming Manual References

[505] Executive Busy Override
[506] Executive Busy Override Deny

Feature Manual References

3.1.21  COS (Class of Service)

Operating Manual References

1.3.23  Executive Busy Override

5.1.4  Extension Dial Lock

Description

An extension user can change the Toll Restriction (TRS) level of the telephone (

®

 17.1.6  TRS (Toll

Restriction)) so that other users cannot make inappropriate CO line calls. An extension personal identification
number (PIN) is used to unlock the telephone (

®

 5.1.6  Extension PIN (Personal Identification Number)).

This feature is also known as Electronic Station Lockout.

Conditions

•

This feature also restricts changing the Call Forward (FWD) destination. (

®

 6.1.6  FWD (Call

Forwarding))

•

Remote Extension Dial Lock

Overrides Extension Dial Lock. If an extension assigned as the manager sets Remote Extension Dial Lock
on an extension that has already been locked by the extension user, the user cannot unlock it. If a manager
extension unlocks an extension that has been locked by the extension user, the extension will be unlocked.
This feature is also known as Remote Station Lock Control.

•

TRS Level

COS programming determines the TRS level for Extension Dial Lock.

92

Feature Manual

Document Version  2009-12  

5.1.4 Extension Dial Lock

Summary of Contents for KX-NCP500

























































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-NCP500

Panasonic KX-TD816 Installation Manual preview
KX-TD816
Brand: Panasonic Pages: 502

Brands by name

Popular brands

Load more brands