Panasonic KX-NCP500, Manual Manual

Page: 199 / 376

Features Descriptions Connections
Wireless XDP
Parallel Mode For information on this type of parallel connection,
refer to the Wireless XDP Parallel mode feature.
(
®
20.1.5 Wireless XDP Parallel Mode)
PBX
PS
PT
APT/DPT/SLT + PS
PS
SLT
Extn. 101
Extn. 101
Extn. 102
Extn. 102
Conditions
[APT + SLT]
•
If one telephone goes off-hook while the other is on a call, a three-party call is established. If one user goes
on-hook, the other user continues the call.
•
An extension user cannot originate a call from the SLT if the APT is:
–
playing background music (BGM)
–
receiving a paging announcement over the built-in speaker.
•
The SLT will always ring for incoming calls (if its ringer is turned on). It cannot be programmed to not ring.
[DPT + SLT]
•
When in the parallel mode, XDP mode of the Super Hybrid port should be turned off through system
programming.
•
Whether the SLT rings for incoming calls is programmable.
Ring on: Both telephones ring when a call is received, except for when the digital proprietary telephone
(DPT) is in Hands-free Answerback mode (
®
8.1.1 Hands-free Answerback) or voice-calling mode
(Alternate Receiving Ring/Voice) (
®
9.1.13 Intercom Call).
Ring off: Only the DPT rings when a call is received, however, the SLT can be used to answer the call.
•
Both telephones cannot engage in calls simultaneously. If one telephone goes off-hook while the other is
on a call, the call is switched to the telephone that goes off-hook. Note, however, that the call will not be
switched when the telephone is:
a.
Being monitored by another extension (
®
3.1.6 Call Monitor).
b.
Receiving an Off-hook Call Announcement (OHCA) (
®
12.1.3 OHCA (Off-hook Call
Announcement)) or Whisper OHCA (
®
20.1.4 Whisper OHCA).
c.
On a conference call (
®
3.1.18 Conference,
®
5.1.3 Executive Busy Override,
®
13.1.14 Privacy
Release).
d.
Using Live Call Screening (LCS) or Two-way Record is activated (
®
19.1.4 Voice Mail DPT (Digital)
Integration).
[DPT + DPT]
•
Available Telephones
KX-DT300 series and KX-T7600 series, except KX-T7640
•
The following features cannot be used on either the master or slave DPT:
Document Version 2009-12 Feature Manual 199
13.1.2 Paralleled Telephone