Panasonic Eco Solutions Nordic AB
MEW01622
Rev: -
EBL128 Planning Instructions V2.0.x
13
3
Overview
3.1
The EBL128 c.i.e.
EBL128 (type no. 4550) is a microprocessor controlled intelligent fire
alarm Control and Indicating Equipment (c.i.e.) intended for analog
addressable smoke and heat detectors. Also conventional detectors
and manual call points can be used. Programmable inputs, control
outputs and I/O units are available. Up to 255 addresses can be
connected to EBL128.
EBL128 is developed and designed according to the European
standard
EN54 parts 2 and 4.
The Swedish front conforms to
SS3654
.
3.1.1
Expansion boards
In the control unit (c.i.e.) it is possible to mount up to four expansion
boards. The following expansion board types are available:
Product type no. Product name
Note
4580
8 zones expansion board
4581
8 relay outputs expansion board
4583
In- and outputs expansion board
Regarding the expansion boards, see also chapter "Expansion boards
458x", page 24 and EBL128 drawings.
3.1.2
Power supply
The main power source is a built-in switched power supply (rectifier)
4557. 230 V AC, 0.6 A / 24 V DC, 1.8 A.
The second power source is a backup battery (2 x 12 V). In the c.i.e.
is space for two 18 Ah batteries.
The batteries and the power supply are connected to the Main board
(4556), which handles the charging of the batteries, etc. See chapter
"Power supply", page 167 for more information.
3.2
S/W Versions
Due to continual development and improvement, different S/W
versions can be found. The control unit S/W can be updated on site.
3.3
Documents
The following documents are available:
Planning instructions
Drawings
Operating instructions
Information found in one document is normally not to be found in
another document, i.e. the documents complement each other.