Panasonic CM301, Operating Manual

Page: 84 / 138

Page 3-6
Production Settings
3-2-2 Selecting Tray Mode
This is used to select the table that will work in the reserved mode.
∗
The table mode is switched on PT.
• Press the feeder table to be worked.
∗
The highlighted switch shows the table set
now.
∗
When the power is on, changing motion is
performed.
3-2-3 Calculating Chip Consumption
This machine can calculate the consumption of chips to the count of production boards beforehand.
• Enter the count of production boards with
numeric keys, then press Run .
The number of the chips required to be set in
the feeder is calculated and displayed.
(
Next Page )
• Tape Cut Timing Setting (Option)
When changing the number of times of cutting,
the length of the empty tape must be the value
or under in the following list.
4H4C-E-OMA03-A01-03
Tape Width Length
8 mm
12 mm
16 mm
24 mm
32 mm
44 mm
56 mm
72 mm
500 mm
500 mm
400 mm
400 mm
300 mm
300 mm
200 mm
200 mm
1
2