Panasonic CM301 Operating Manual Download Page 123

Page: 123 / 138

Page 5-1

4H4C-E-OMA05-A01-00

Chapter

SETTING PRODUCTION MATERIALS

Chip Feeding Devices

This machine is fed with chips by the following three devices. Chips are supplied by
changing trays, changing tape feeders or supplying chips to bulk feeders.

Tray Feeder

• Chips are fed while on the tray.
• To supply chips, take out the pallet where the

tray is set.
(Chips can be exchanged also by the
magazine.)

Tape Feeder (Option)

• Chips are fed by the reeled tape.

• Chips are supplied by changing tape feed-

ers.

Bulk Feeder (Option)

• Chips are fed by the bulk cassette.

• Chips can be supplied while the feeder is set

on the feeder table.

∗

Bulk feeder supporting unit (option) is
required.

∗

For information about how to handle tape and bulk feeders, refer to their respective manuals.

Summary of Contents for CM301











































































































































Search results

Summary of Contents for CM301

Reviews:

Related manuals for CM301

Brands by name

Popular brands

Panasonic CM301, Operating Manual

Search results

Summary of Contents for CM301

Reviews:

Related manuals for CM301

Brands by name

Popular brands