Panasonic CM301, Operating Manual

Page: 104 / 138

Page 3-26
Machine Adjustment
3-4-9 Axis Information
This is used to check the current positions of all the axes the machine controls and the status
information.
Current pos cnt
Displays the current position of each axis in
mm or pulse of status address.
pulse : Displays the current position in pulse.
mm : Displays the current position in mm.
Status
Displays the state of status address, error/puls
in a turn of each axis, in bit.
Pulse in a turn
This data is sampled and displayed against X-
and Y-axes only.
<Meaning of abbreviation>
X : X-axis of X-Y unit
Y : Y-axis of X-Y unit
ZA : ZA-axis
θ
A :
θ
A-axis
ZB : ZB-axis
θ
B :
θ
B-axis
3-4-10 Recognition Device Maintenance
This is used to check all the recognition processing motions.
∗
For information about how to operate it, refer to “Appendix A RECOGNITION DEVICE” ( A-5
Recognition Device Maintenance ).
3-4-11 Ring Load Information
This is used to display the load onto ring.
4H4C-E-OMA03-A01-03