Panasonic CM301, Operating Manual

Page: 81 / 138

Page 3-3
FUNCTIONS
3
4H4C-E-OMA03-A01-00
3-1-2 Engineer Mode
Menu Configuration
Engineer
Data modify
Describes customizing the functions of the operator mode.
3-5-6 Customizing Operator Mode
Describes setting the time of the machine.
3-5-4 Setting Time
Describes specifying and resetting defective nozzles.
3-5-3 Defective Head
Describes checking nozzle stock data.
7-7 Nozzle Stock Data
Describes checking and modifying mount data.
7-9 Mount Data
Describes checking production data.
7-12 Data Check
Describes checking and modifying board data.
7-2 PCB Data
Describes checking nozzle arrangement data.
7-6 Nozzle Arrangement Data
Describes teaching production data.
Chapter 8 TEACHING
Describes checking and modifying board recognition data.
7-3 Board Recognition Data
Describes checking feeder layout list and stock data.
7-4 Feeder Layout / Stock Data
Describes checking the settings of function switches.
7-10 Function Switch
Describes checking and modifying block attribute data.
7-8 Block Attribute Data
Describes checking the correction value by pick-up position learning.
3-5-2 Pick-up Position Learning
Describes changing the conditions for the motions for production.
3-5-1 Switches for Adjustment
Describes loading/saving machine parameters.
Chapter 6 Sub operation
Describes loading production data.
Chapter 6 Main operation
Refer to the Mainte-
nance Manual.
File
managment
Machine
parameter
Machine
config
Machine
adjust
Displays the tape feeder library data.
7-11 Feeder Library
Displays the recognition library data.
7-11 Recognition Library
Displays the nozzle library data.
7-11 Nozzle Library
Describes displaying the input addresses in bit.
3-4-7 Input Check
Describes checking recognition processing motion.
APPENDIX A RECOGNITION DEVICE
Describes returning all axes to their origins.
3-4-1 Returning to Origin
Describes adjusting the width of conveyor.
3-4-2 Conveyor Width Adjustment
Describes transporting board onto conveyor.
3-4-3 Board Transport
Describes changing nozzles.
3-4-4 Nozzle Changing
Describes displaying the load onto ring.
3-4-11 Ring Load Information
Describes checking the state of valve and working it.
3-4-8 Output Check
Describes checking the current positions and states of all axes.
3-4-9 Axis Information
Describes pick-up, recognition and mounting motions.
3-4-5 Pick-up and Mounting Motions
Describes drawing out the tray pallet.
3-4-6 Tray Adjustment
Describes setting the backlight-off time.
3-5-5 Setting Backlight