Panasonic CM301, Operating Manual

Page: 126 / 138

Page 5-4 4H4C-E-OMA05-A01-02
5-1-2 Offset Block for Pallet
The pick-up position is restricted because of the head movement range. Shifting the restriction of
the pick-up position can pick up chips.
Offset Block
Two offset blocks are used for a pallet.
Tray Conditions to Use the Offset Block
1
. The tray size must satisfy the specifi-
cation condition above.
2
. The first pick-up point must be 4 mm
to 12 mm.
∗
Use an ordinary pallet (without the offset block)
when the first pick-up point is 12 mm or over.
∗
When setting a different-shape tray, judge
whether the pallet is the one with the offset
block or an ordinary one, and then use it.
• Chips may not be picked up because the data
position is deviated.
Setting Trays
Block
Fixing Bolt
Washer
CM301 Standard Specification
“Pick-up Position
Condition Range”
T
ray Max. 335 mm
Tray Setting Reference
(Tray Origin)
Pick-up Position
(Chip Center)
Specification with Offset Block Tray
First Pick-up Point
4H4C-027E 4H4C-028E
4H4C-035P
4H4C-036P
8 mm
Tray Max. 230 mm
325 mm
206 mm
12 mm
“Pick-up Position Condition Range”
4 mm
“Pick-up Position
Condition Range”
T
ray Max. 335 mm
Tray Max. 222 mm
325 mm
206 mm
“Pick-up Position Condition Range”