Panasonic CM301, Operating Manual

Page: 136 / 138

Page 5-14
Supplying Chips during Production
5-3-2 Tray Feeder Tables Motion in Supplying Chips
The tray feeder is divided in two (A and B), and the motion of the table varies according to the set
mode.
This part describes the motion of the tray feeder table in each mode.
∗
To check the mode, choose “Table mode select” from “Production config menu”.
( “3-2-2 Selecting Table Mode” )
Joint Mode
In this mode, the feeder is not divided.
Up to 40 types of chips can be used.
Spare Mode
In this mode, one of the divided feeder tables
is not used.
The chips for the next board type can be set
during production.
The chips on both
the tables are used
for the board A.
4H4C-E-OMA05-A01-01
4H4C-012E
For A
Board A
The chips for the
board B can be set
while the board A is
produced.
4H4C-013E
For A
Board A
For B