65
Aquarea Heat Pump Manager (HPM) – Manual Part 1: Installation and Commissioning – 12/2014
Commissioning
8
8 Commissioning
During commissioning, the HPM controller requires configuration for the respective heating
system. The controller is pre-programmed with about 600 system diagrams to simplify
the configuration. When commissioning, the appropriate system diagram will be loaded
for the respective heating system in the HPM controller and adjusted if necessary. For
selecting the system diagram, Panasonic provides the HPMtool as web-based software at
www.hpmtool.eu
.
Commissioning is done in the following steps:
●
Selecting the System Diagram in HPMtool
● Load system diagram to configure the HPM controller
●
Set operating mode switch to
Auto
●
Perform further settings, if required.
8.1 Selecting the System Diagram in HPMtool
Process when selecting a system diagram in the HPMtool:
►
In an internet browser, open
www.hpmtool.eu
.
Fig. 8.1: On-line application HPMtool – Start screen
Summary of Contents for Aquarea PAW-HPM1
Page 2: ...Notes ...
