Panasonic Aquarea PAW-HPM1, Installation And Commissioning Manual

Page: 101 / 118

101
Aquarea Heat Pump Manager (HPM) – Manual Part 1: Installation and Commissioning – 12/2014
Commissioning
8
Start and end of the occupation time may not cross over. Day-crossover occupation times can
be set by entering two time periods.
Example 3: Birthday celebration with day-crossover occupation time from Friday to
Saturday
Procedure:
► Open timer channel HeatC1 as described before.
► Using the
[▼]
button, select the Week programme submenu.
► Confirm using the
[OK]
button.
► Perform the following settings and confirm using the
[OK]
button:
Name Information text Standard
setpoint
Settings for
this example
Remark
fr numOT Friday number OT 2 2
fr beg OT1 Friday begin OT1 00:00 06:00
fr end OT1 Friday end OT1 24:00 09:00
fr beg OT2 Friday begin OT2 – –:– – 16:00 Begin from Friday OT2
as usual, e.g. at 16:00
fr end OT2 Friday end OT2 – –:– – 24:00 Fr OT2 is continued until
24:00
sa numOT Saturday number OT 2 2
sa beg OT1 Saturday begin OT1 00:00 00:00 Sa OT1 begins seam-
lessly at 00:00
sa end OT1 Saturday end OT1 24:00 04:00 Sa OT1 ends at 04:00
sa beg OT2 Saturday begin OT2 00:00 09:00 Begin from Saturday
OT2 as usually, e.g. at
09:00
sa end OT2 Saturday end OT2 24:00 22:00
A daily crossover-occupation time of Friday from 16:00 and Saturday from 04:00
in the morning has been set.
If no changes to the weekly programme are made for such a one-time extension
of the occupation period, the party function can be used instead (→ Party
Functions, P. 42 ).