USER GUIDE AND SPECIFICATIONS
NI 9683
General Purpose Inverter Controller RIO Mezzanine Card
This document provides pinouts, connectivity information, and specifications for the National
Instruments 9683 General Purpose Inverter Control (GPIC) RIO Mezzanine Card (RMC).
Caution
National Instruments makes no product safety, electromagnetic
compatibility (EMC), or CE marking compliance claims for the NI 9683. The
end-product supplier is responsible for conformity to any and all compliance
requirements.
Caution
The NI 9683 must be installed inside a suitable enclosure prior to use.
Hazardous voltages may be present.
Caution
Exercise caution when placing the NI 9683 inside an enclosure. Auxiliary
cooling may be necessary to keep the device under the maximum ambient
temperature rating for the NI 9683. Refer to the
section for more
information about the maximum ambient temperature rating.
Caution
The NI 9683 is designed for low voltage signals. You must ensure that all
signals connected to the NI 9683 are isolated and no unsafe voltages are present at
the NI 9683 inputs. Voltages that exceed the specifications could result in damage to
the NI 9683.
Caution
Use the NI 9683 with only NI sbRIO-9605/9606 devices. The NI 9683 is
not electrically or mechanically compatible with other NI sbRIO devices.
Caution
Do not operate the NI 9683 in a manner not specified in this user guide.
Product misuse can result in a hazard. You can compromise the safety protection built
into the product if the product is damaged in any way. If the product is damaged,
return it to National Instruments for repair.
