Panasonic AJ-HPD2500E Page 201 Operating Instructions Manual Download

Page: 201 / 236

Setup: Item Settings

201

tup

This menu is used for setting up the LCD monitor.

•

indicates factory default settings.

LCD

Item

Setting

Settings and brief function description

No.

SUPER

DISP.

No.

SUPER

DISP.

900

LCD PROTECT

0000

0001

OFF

Sets LCD protect mode.

OFF: Protect mode is off.

ON: Protect mode is on.

NOTE:

• LCD output is turned off when the front panel is not used or video is not updated for

about 5 minutes.

• To cancel protect mode, press a front panel button, dial or start playback from the

controller. The operation that canceled LCD PROTECT mode will then take place.

905

BRIGHT

0000

0007

0014

–7

Adjusts the brightness of the LCD monitor.

910

CONTRAST

0000

0030

0060

–30

Adjusts the contrast of the LCD monitor.

NOTE:

This setting multiplied by the R, G and B contrast settings (setup menus No. 911 (R

CONTRAST), No. 912 (G CONTRAST), No. 913 (B CONTRAST)) makes the R, G and B

contrast setting.

911

R CONTRAST

0000

0030

0060

–30

Adjusts the R (Red) contrast of the LCD monitor.

NOTE:

This setting multiplied by the setting in setup menu No. 910 (CONTRAST) makes the

contrast setting.

912

G CONTRAST

0000

0030

0060

–30

Adjusts the G (Green) contrast of the LCD monitor.

NOTE:

This setting multiplied by the setting in setup menu No. 910 (CONTRAST) makes the

contrast setting.

913

B CONTRAST

0000

0030

0060

–30

Adjusts the B (Blue) contrast of the LCD monitor.

NOTE:

This setting multiplied by the setting in setup menu No. 910 (CONTRAST) makes the

contrast setting.

Summary of Contents for AJ-HPD2500E













































































































































































































































Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands

Panasonic AJ-HPD2500E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands