218
For Long and Trouble-Free Operation: Error Messages
The following warning messages appear when an incorrect operation is attempted in the thumbnail playlist screen.
Item
Message
Description
Measure
Thumbnail
CANNOT ACCESS
GATEWAY!
CHECK LAN SETTING
Cannot access gateway server.
Check if LAN setup is correct.
CANNOT ACCESS!
Data cannot be accessed because it is corrupted
or for other reasons.
Restore media and clips to normal state before
access. When displayed during network operation,
check LAN setup, make sure the LAN cable is
correctly connected and check that your network
environment is functioning properly.
CANNOT ADD! NO
INPUT
User name or password in not entered correctly. Enter user name or password correctly.
CANNOT CHANGE!
A thumbnail containing a grayed out text memo that
cannot be generated is not available for editing.
Edit settings or content to enable thumbnail display.
CANNOT CONNECT! Connection to the network cannot be established. Check LAN setup, make sure the LAN cable is
correctly connected and check that your network
environment is functioning properly.
CANNOT CONVERT!
Inconvertible clips are included.
Check the selected content.
CANNOT DELETE!
Contents version mismatch prevents deletion.
Match devices and contents version.
CANNOT FIND
FTP-SERVER!
FTP server cannot be found.
Check if FTP client URL is correct.
CANNOT FORMAT!
P2 card problem prevents formatting.
Check P2 card.
CANNOT
RE-CONNECT!
A clip that does not span multiple cannot be
reconnected.
Check selected content.
CANNOT REPAIR IN
SELECTION!
Some of the selected clip could not be repaired.
CANNOT REPAIR!
Selected content cannot be repaired.
Check selected content.
CANNOT SAVE!
FILE NAME IN USE
A network setup file with the same file name
exists on the SD memory card.
Save to a different name.
CARD FULL!
The P2 or SD memory card is full.
Insert media with sufficient capacity.
INVALID VALUE!
Entered data was invalid.
Enter data in a valid range.
IP ADDRESS IS
USED!
The set IP address is used on another device.
Consult the network administrator, and set another
IP address.
LACK OF REC
CAPACITY!
There is not enough recording capacity left on the
card.
Insert a card with sufficient recording capacity.
LOGIN FAILED!
Login to destination FTP server failed.
Check if user ID and password for the FTP client are
correct.
MISSING CLIP!
All cards that contain the clip must be inserted to
allow attachment of shot marks.
Insert all cards that contain the clip.
NO CARD!
No P2 or SD memory card is inserted.
Insert compatible media.
NO CONTENTS!
No P2 data in the connected network folder.
Connect to a folder that contains P2 data.
NO CONVERTIBLE
CLIP!
No clips are convertible.
Select convertible clips and try again.
NO COPY TO SAME
CARD!
A clip cannot be copied to the card storing the
original clip.
Copy the selected clip to a card that does not
contain the original clip.
NO INPUT!
No data is input.
Set after making input.
NO SD CARD!
No SD memory card is inserted.
Insert an SD memory card.
NOT SELECTED!
An attempt was made to delete an unselected
clip.
Select the clip you want to delete.
PING FAILED!
CHECK LOG or
SET FTP-URL
PING failed.
Check if LAN setup, FTP client URL and LAN cable
connection are correct.
SAME CLIP IS
SELECTED!
The selected clips contain multiple copies of the
same clip (duplicated using COPY).
Multiple copies of the same clip (duplicated using
COPY) cannot be simultaneously copied. Deselect
all identical copies from the selected clips.
TOO MANY CLIPS!
Too many clips are selected.
Reduce the number of selected clips.
UNKNOWN
CONTENTS
FORMAT!
This warning appears when data not compatible
with the unit is detected.
• Match devices and contents version.
• If a bad clip exists (in the copy destination in case
of copy), repair or remove the bad clip.
