140
Connections: Connecting This Unit to a Network
Setting:
◆
NOTE:
• When NETWORK is set to ENABLE, starting up may take longer time since the unit will connect to the network when it is turned on.
• The network cannot be accessed when NETWORK is set to DISABLE. A switch between ENABLE and DISABLE does not take effect until the
unit is restarted.
• A change in setting may lengthen the time required for the setup screen to close since the network service will have to be restarted using a
different setting.
• When DHCP is set to ENABLE, settings other than MAC ADDRESS and NETWORK are disabled.
• IP address, subnet mask and default gateway must be correctly combined.
If the “CANNOT ACCESS GATEWAY!” warning appears as the setup screen closes, consult the network administrator.
• Set 0.0.0.0 when default gateways or DNS will not be used.
• DHCP and DNS may not operate properly in some network environments.
Follow the steps below to make the required settings such as
an address of connection server to use the FTP client to
transfer clips or the HTTP browser.
1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [NETWORK] –
[SETUP] – [CLIENT] and press the SET button.
4
The client setup screen appears.
Current settings appear.
Use the cursor buttons to select an item and press the SET
button to set it.
FTP CLIENT:
• The set password cannot be displayed on this unit.
Item
Description
Set value
Factory defaults
MAC ADDRESS
MAC ADDRESS (unique ID)
Cannot be changed.
Set value (cannot be
changed)
DHCP
DHCP setting
ENABLE:
Uses DHCP (automatic assignment)
DISABLE
DISABLE:
Does not use DHCP (automatic
assignment)
IP ADDRESS
IP address
Enter using the ten keypad
192.168.0.2
SUBNET MASK
Subnet mask
Enter using the ten keypad
255.255.255.128
DEFAULT GATEWAY
Default gateway
Enter using the ten keypad
192.168.0.1
PRIMARY DNS
Set primary DNS server
Enter using the ten keypad
0.0.0.0
SECONDARY DNS
Set secondary DNS server
Enter using the ten keypad
0.0.0.0
NETWORK
Network service start setting
ENABLE:
Starts network service when the unit is
turned on.
DISABLE
DISABLE:
Does not start network service.
Client setting
Item
Description
Setup procedure
Factory defaults
URL
Name or address of
connection server
Enter using the full keyboard. (up to 500 characters).
No setting
USER ID
ID of the user making the
connection
Enter using the full keyboard. (up to 31 characters)
No setting
USER PASSWORD
Password for user making the
connection.
Enter using the full keyboard. (up to 31 characters)
No setting
SSH
Set to use SSH for file
transfers.
ENABLE:
Enables SSH.
DISABLE
DISABLE:
Disables SSH.
