Panasonic AJ-HPD2500E Page 184 Operating Instructions Manual Download

Page: 184 / 236

184

Setup: Item Settings

032

REC REF

0000

0001

NORMAL

SLTC

Specifies the reference to synchronize the frames for recording.

0: The input video signal is automatically identified and serves as reference.

1: The time code which is input to the SD I IN connector is identified and serves as

reference.

NOTE:

When the SLTC is selected, the following settings are necessary to validate the settings

for this item:

• Setup menu No. 25 (SYSTEM FREQ): 59.94

• Setup menu No. 020 (SYS FORMAT): 720p

• VIDEO IN (SHIFT+EDIT MODE) button on the unit: HDSDI

034

A.SMPL RES

0000

0001

16BIT

24BIT

0: Audio recording is made in 16-bit.

1: Audio recording is made in 24-bit.

NOTE:

• When 24BIT is selected, the following settings are also required to make the 24BIT

setting valid.

– Setup menu No.020 (SYS FORMAT): 1080i or 720p

– Setup menu No.025 (REC FMT (HD): AVC50 or AVC100

040

VFR REC

0000

0001

OFF

Specifies whether or not to make a VFR recording when the recording format is 720p.

0: Does not make VFR recording

1: Makes VFR recording

➝

Refer to “Recording From a Variable Frame-Rate Camera” (page 46).

041

LOOP REC

0000

0001

OFF

Specifies whether or not to make loop recording.

➝

For details, refer to “LOOP REC Function” (page 43).

0: Does not make loop recording

1: Makes loop recording

NOTE:

Turning the power off cancels this setting. The unit will then start up using the default

value (OFF) next time it is powered up.

050

P.ON GUI

0000

0001

0002

OFF

THUMB

PLYLST

Specifies whether or not the thumbnail screen or playlist screen appears when the power

is turned on.

0: Does not display thumbnail screen and playlist screen.

1: Displays the thumbnail screen.

2: Displays the playlist screen.

051

GUI OUTPUT

0000

0001

0002

0003

LCD

LCD&M

LCD&S

ALL

Specifies whether the GUI screen will be output to ANALOG MONITOR OUT/SDI

MONITOR OUT/SDI OUT.

0: Not output (LCD monitor only)

1: Output to LCD monitor and ANALOG MONITOR OUT, SDI MONITOR OUT

2: Output to LCD monitor and SDI OUT

3: Output to LCD monitor and ANALOG MONITOR OUT, SDI MONITOR OUT, SDI OUT

NOTE:

• When 23.98 or 59-23 is selected in setup menu No. 25 (SYSTEM FREQ), the refresh

of the GUI screen output to SDI OUT may seem unnatural. Also, when the GUI screen

switches to the video screen (and vice versa), the output signal may be distorted.

• Some characters on the GUI screen output to ANALOG MONITOR OUT, SDI

MONITOR OUT may not be clear.

Item

Setting

Settings and brief function description

No.

SUPER

DISP.

No.

SUPER

DISP.

59.94Hz

only

29.97Hz

59-23Hz

60-24Hz

60-25Hz

only

59.94Hz

50Hz

23.98Hz

29.97Hz

59-23Hz

25Hz

60-25Hz

only

Summary of Contents for AJ-HPD2500E













































































































































































































































Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands

Panasonic AJ-HPD2500E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands