Panasonic AJ-HPD2500E Page 70 Operating Instructions Manual Download

Page: 70 / 236

Clip Management: Repairing and Reconnecting Clips

Repairing and Reconnecting Clips

This section describes how to restore bad clips that have

been damaged due sudden power outages during recording

or for other reasons. Such clips are marked by the bad clip

indicator (yellow

). Use the following procedure to repair

bad clips.

Open the thumbnail screen.

Select the bad clip to repair.

Press the MENU button.

Use the cursor buttons to choose [OPERATION] –

[REPAIR CLIP] and press the SET button.

Select [YES] and press the SET button.

◆

NOTE:

• Some clips are so badly damaged they cannot be repaired.

Such clips are indicated by a red

A clip spanning multiple P2 cards that cannot be recognized

as a complete clip is marked by the incomplete clip (

indicator). The reconnection function allows you to reconnect

related clips and restore the original clip.

◆

NOTE:

Incomplete clips occur under the following conditions.

• When the individual clip segments on each P2 card that make up the

clip are copied separately.

• When the clip segments on each card that make up a clip recorded

on multiple cards are separately copied to a hard disk and then

copied back to a P2 card.

• When a 5-minute or longer DVCPRO HD or AVC Intra100 clip (10-

minute or longer DVCPRO50 or AVC Intra50 and 20-minute or longer

DVCPRO or DV clip) is copied to a hard disk drive and later written

back to a P2 card.

Open the thumbnail screen.

Select the incomplete clips to reconnect.

◆

NOTE:

• Normally, thumbnails with the incomplete clip mark are usually

grouped together.

Press the MENU button.

Use the cursor buttons to choose [OPERATION] –

[RE-CONNECTION] and press the SET button.

Select [YES] and press the SET button.

◆

NOTE:

• When some but not all the clip segments in a clip that consists

of three or more clip segments are reconnected, the incomplete

clip mark will remain.

Repairing Bad Clips

Reconnecting Incomplete Clips

Summary of Contents for AJ-HPD2500E













































































































































































































































Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands

Panasonic AJ-HPD2500E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands