Panasonic AJ-HPD2500E Page 33 Operating Instructions Manual Download

Page: 33 / 236

Introduction: Control Reference Guide

Intr

od
uc
tio
n

U lamp

In the EE mode, this lamp lights when an input signal

contains UMID information.

Lights during playback when the recording contains

UMID information.

Goes off in the playlist mode.

WIDE lamp

This lamp lights when 16:9 aspect ratio (wide) data is

recorded on a P2 card in SD mode.

Use the setup menu No.645 (WIDE SELECT) to specify

whether or not wide data be recorded.

This lamp lights to indicate that 16:9 aspect ratio data

is recorded when playing back a clip recorded in SD

mode.

This lamp goes off in the playlist mode.

REC/REC INH lamp

Indicates selected recording status of a P2 card.

Format display

Indicates the recording format or the format of video

recorded on inserted P2 cards.

Counter display

Indicates the CTL, TC and UB counter and time code

values.

10.

Operating mode

Indicates the operating status of this unit.

: Normal playback and recording

: Playback at speeds lower than 1×

: Playback at speeds higher than 1×

: FF

: Reverse playback at 1× speed

: Reverse playback at speeds lower than

1×

: Reverse playback at speeds higher than

1×

: REW

: STILL

REC lamp on:

Lights in recording mode.

REC INH lamp

on:

Lights when recording is disabled

(when the REC INH switch on the

front panel is lit or all P2 cards are

write protected).

No recordings can be made on P2

cards when this lamp is on.

CTL:

Relative position from the beginning.

TC:

Read time code.

UB:

User bits of read time code.

Summary of Contents for AJ-HPD2500E













































































































































































































































Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands

Panasonic AJ-HPD2500E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands