Panasonic AJ-HPD2500E Page 63 Operating Instructions Manual Download

Page: 63 / 236

Clip Management: Continuous Playback of Clips by Inserting/Removing P2 Cards

Cl
ip
Man

age

men

■

Information display during continuous playback

• When the PROP (SHIFT + TC PRESET) button is held down

during playback, the following screen appears.

C (Current) and N (Next) indicators

“C” appears in the row for the P2 card slot with the clip

being played. “N” appears in the row for the P2 card slot

with the clip to be played next.

* indicator

An asterisk (*) appears in the row for a P2 card slot that

includes playable clips.

P2 card slot number

Start time code

Displays the time code at the beginning of the clip to be

played first in each P2 card slot.

• When setup menu No.006 (DISPLAY SEL) is set to T&S&M,

the number of the P2 card slot with the clip being played

and that with the clip to be played next are indicated on the

third row of the superimpose display.

Number of the P2 card slot with the clip being played

Number of the P2 card slot with the clip to be played

The symbol “-” is displayed if no clip is played next.

◆

NOTE:

• The slot(s) and clip(s) located before the cursor position on the

thumbnail screen when playback starts are not included for

continuous playback.

• The STOP and STILL/PAUSE buttons are only operative during

playback. When [THUMBNAIL] – [SETUP] – [STOP MODE] is

set to STAY, the unit enters playback pause mode when the

button is pressed, and continuous playback resumes if you

press the PLAY button.

• Playback is not possible when the cursor is placed on a

thumbnail with the SPANNED indicator.

• The playback start position of a clip is specified on the setup

menu [THUMBNAIL] – [SETUP] – [PB POSITION].

• Do not remove a P2 card during playback when the P2 card

access LED flashes orange.

• Do not insert a P2 card that is unformatted, contains an error, or

includes a clip with an error during playback, or do not repeat

inserting and removing a P2 card at short intervals. Doing so

may stop playback.

• If a P2 card is inserted into the next slot to be played back, just

before starting playback of that slot or during transition to

playback, the inserted P2 card may only be played back after

all the slots have been played back once.

)

Summary of Contents for AJ-HPD2500E













































































































































































































































Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands

Panasonic AJ-HPD2500E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands