Panasonic AJ-HPD2500E Page 202 Operating Instructions Manual Download

Page: 202 / 236

202

Setup: Item Settings

This menu is used for menu settings.

•

indicates factory default settings.

Item

Setting

Settings and brief function description

Remarks

No.

SUPER

DISP.

No.

SUPER

DISP.

A00

LOAD

0000

0001

0002

0003

USER2

USER3

USER4

USER5

Specifies user files loaded in USER 1.

0: Loads the contents of USER 2

1: Loads the contents of USER 3

2: Loads the contents of USER 4

3: Loads the contents of USER 5

NOTE:

Pressing the MENU button when loading completes opens a

confirmation dialog. Press the SET button to store the setting. Press

the EXIT button to discard the change and retain the setting.

Setting available

for USER1 only

A01

SAVE

0000

0001

0002

0003

0004

USER2

USER3

USER4

USER5

LOCKED

Specifies the user file that saves USER 1 settings.

0: Saved to USER 2

1: Saved to USER 3

2: Saved to USER 4

3: Saved to USER 5

4: Appears when all user files are write protected.

NOTE:

• A user file in change prohibit status cannot be selected.

• When all user files are in the change prohibit status, “LOCKED”

appears and data cannot be saved.

Setting available

for USER1 only

A02

P.ON LOAD

0000

0001

0002

0003

0004

OFF

USER2

USER3

USER4

USER5

Specifies which user files will be loaded into USER 1 and whether or

not the USER 1 settings should be used in startup when the power is

turned on.

0: Operation is started with the settings of the previously set user file.

1: The content of USER 2 is loaded into USER 1.

2: The content of USER 3 is loaded into USER 1.

3: The content of USER 4 is loaded into USER 1.

4: The content of USER 5 is loaded into USER 1.

Setting available

for USER1 only

A03

MENU LOCK

0000

0001

OFF

Sets/releases the user file (USER2 - USER 5) lock mode.

0: Releases the lock. (File data can be changed.)

1: Lock is engaged. (File data cannot be changed.)

NOTE:

• USER 1 cannot be locked.

• Files can be loaded from the SD memory card even if they are

locked. The status after load operation depends on the setting

defined by the loaded data.

Setting available

for USER2 to

USER5 only

A04

PF1 ASSIGN

Registers a setup menu item in the PF1 button.

A05

PF2 ASSIGN

Registers a setup menu item in the PF2 button.

A06

PF3 ASSIGN

Registers a setup menu item in the PF3 button.

A10

CARD READ

Select files from the four SD memory card files to load into the menu.

This function is available only to USER 1-5 (SYSTEM) and USER 1-5.

Setting available

for USER1 only

A11

CARD WRITE

Select one of the four files on an SD memory card to write a menu

setting.

The write function is available only to USER 1-5 (SYSTEM).

Titles can be added to the files and the files can be edited.

Setting available

for USER1 only

A12

CARD FORMAT

Formats SD memory cards.

Setting available

for USER1 only

Summary of Contents for AJ-HPD2500E













































































































































































































































Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands

Panasonic AJ-HPD2500E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands