Panasonic AJ-HPD2500E Operating Instructions Manual Download Page 93

Page: 93 / 236

Editing: Playlist Function

18.

PLAY/REVIEW button

PLAY button

Use to play back video on the player or recorder.

REVIEW (SHIFT + PLAY) button

Use to review playback of event at the cursor location

or temporarily registered event during recorder

operation.

19.

REC button

Finalizes an edit operation, registers the event and

displays it on the timeline. Imports video to a P2 card

from an external device (RS-422A), an external input

(live recording), or hard disk used as the player.

Use the REC + PLAY button during playback in the

A.DUB mode to start voice-over recording.

➝

Refer to “Recording Voice-Overs” (page 111).

20.

PREVIEW/A LEVEL REC buttons

PREVIEW button

Use this button to preview playback of event that is

being registered. Before the preview, the event is

registered and appears on the timeline. When the

player is a P2 card, the level changes made using the

audio level control during a preview are set in a

registered event.

➝

Refer to “Setting Audio Level” (page 114).

◆

NOTE:

• Events created from external devices or hard disks are

indicated in orange as temporarily registered events.

• Preview playback is disabled for an external input (live

recording).

A LEVEL REC (SHIFT + PREVIEW) button

Press this button to enable adjustment of the audio

level with the audio level control simultaneous with a

preview of the IN and OUT points of the recorder. This

mode allows you to dynamically change the audio level

in the event.

➝

Refer to “Setting Audio Level” (page 114).

21.

SHIFT button

This button is used in combination with other buttons.

22.

REC/UNITY/PB selection switch and audio level

controls

Select recording (REC position) or playback (PB

position) by the selection switch and adjust the levels

of audio signals by the audio level controls for audio

recording/playback and voice-over recording (sound

mixed with playback sound).

◆

NOTE:

• Levels cannot be adjusted during playback of a playlist.

Summary of Contents for AJ-HPD2500E













































































































































































































































Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands

Panasonic AJ-HPD2500E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands