Panasonic AJ-HPD2500E Page 133 Operating Instructions Manual Download

Page: 133 / 236

Connections: Using This Unit With a Hard Disk

133

C
onn

ect
ion
s

Use the steps below to import data (load data from a hard disk

to a P2 card) by partition (by P2 card) to a P2 card that has

the same capacity as the source card.

Insert the P2 card that will store the imported

partition.

Be sure to insert a formatted P2 card.

Press the THUMBNAIL button to open the thumbnail

display.

Connect the hard disk and wait until the hard disk

indicator appears after disk recognition.

Press the MENU button.

Use the cursor buttons to select [HDD (USB or

eSATA)] – [EXPLORE] and press the SET button.

Use the cursor buttons to select the partition from

which data will be imported in the hard disk explorer

screen. Or press the SET button repeatedly to open

the thumbnail list screen.

Press the MENU button.

Use the cursor buttons to choose [OPERATION] –

[IMPORT] and press the SET button.

Select the number of the P2 card slot that will store

the imported data and press the SET button.

Select [YES] and press the SET button.

The data will now be imported.

When the import operation ends, the message “COPY

COMPLETED” appears.

◆

NOTE:

• When data is imported to a P2 card that differs from the original

P2 card, some clips may become incomplete (showing the

indicator). Then use the reconnection function to rebuild the clip.

➝

Refer to “Reconnecting Incomplete Clips” (page 70).

• The [HDD (USB or eSATA)] – [SETUP] – [VERIFY] menu setting

allows you to turn verification during copying on or off.

• It is not possible to import data by partition between P2 cards

with different model numbers. Copy data by clip.

Use the steps below to select a hard disk clip and copy it to a

P2 card or FTP server.

Open the hard disk thumbnail screen.

Select a clip to copy.

Press the MENU button.

Use the cursor buttons to choose [OPERATION] –

[COPY] and press the SET button.

Use the cursor buttons to select the copy destination

and press the SET button.

When the FTP server is selected, a list of folders in the FTP

server is displayed. Select the destination folder for

copying.

Select [YES] and press the SET button.

The clip will now be copied.

When the copy operation ends, the message “COPY

COMPLETED” appears.

◆

NOTE:

• Copying of clips to a P2 card or FTP server is not verified.

Importing/Copying Data from a Hard
Disk to a P2 Card or FTP Server

Importing data by partition (TYPE S hard
disks and P2 Store disks only)

Copying data to a P2 card or FTP server by
clip

Summary of Contents for AJ-HPD2500E













































































































































































































































Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands

Panasonic AJ-HPD2500E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands