Panasonic AJ-HPD2500E Page 164 Operating Instructions Manual Download

Page: 164 / 236

164

AVCHD Recording and Playback: Using an Optional AVCHD Board

Use the steps below to delete or protect clips.

Press the MODE (SHIFT+REMOTE) button to switch

to the AVCHD mode.

➝

Refer to “Switching to AVCHD mode” (page 162).

Press the MENU button.

Select [OPERATION] and press the SET button.

Press the up and down (

) cursor buttons to select

an item and press the SET button.

DELETE:

Deletes Clips.

◆

NOTE:

• Protected clips cannot be deleted.

• Deleting clips selected using ALL CLIPS may take time if the

clips are large.

CLIP PROTECT:

◆

NOTE:

• Note that formatting an SD memory card will delete protected

clips.

Press the MENU button to return to the thumbnail

screen.

Use this function to check the model number and serial

number of the unit.

Press the MODE (SHIFT+REMOTE) button to switch

to the AVCHD mode.

➝

Refer to “Switching to AVCHD mode” (page 162).

Press the MENU button.

Use the cursor buttons to choose [SYSTEM INFO]

and press the SET button.

Deleting and protecting clips
(OPERATION)

ALL CLIPS:

Deletes all clips. Select [YES]/[NO] and

press the SET button.

SELECT:

Deletes selected clips. Select [SELECT:],

press the SET button, move the cursor to

the clip you want to select, and then

press the SET button again. The selected

clip will be indicated by an orange frame.

(This allows you to make multiple

selections.) Pressing the SET button a

second time cancels the selection.

Pressing the ENTRY button after

selecting deletes the clip.

NO:

The previous screen reappears.

YES:

Protects clips or releases protection.

Move the cursor to the clip to be

protected, then press the SET button (a

symbol mark is displayed). Or move the

cursor to the protected clip and press

the SET button to release protection (the

symbol mark disappears). Repeat this

procedure to protect a clip or release

protection of a clip.

NO:

The previous display returns.

Checking model number and serial number
(SYSTEM INFO)

Summary of Contents for AJ-HPD2500E













































































































































































































































Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands

Panasonic AJ-HPD2500E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500E

Reviews:

Related manuals for AJ-HPD2500E

Brands by name

Popular brands