Pacific Power Source 3120AFX, Operation Manual

Page: 146 / 274

AFX SERIES® OPERATION MANUAL
SECTION 8: REMOTE PROGRAMMING
Entire Contents Copyright

2016 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 146 of 274
Command Syntax MEASure:LOGger:FILEName <cr>
Description Sets the data logging file name
Parameters Filename between double quotes
Parameter Format <cr>
Example MEAS:LOG:FILEN “Measurement-AC+DC”
Query Format MEASure:LOGger:FILEName?
Returned Data Format <cr>
Query Example MEAS:LOG:FILEN?
Measurement-AC+DC
Command Syntax MEASure:LOGger:MEMory <cr>
Description Select the memory where the logging files will be saved. By default it is
RAM unless a memory stick or USB drive was inserted and selected
with this command:
MEAS:LOG:MEM:CAT? can be used to get the available memories.
Parameters Memory name between double quotes.
Parameter Format <cr>
Example MEAS:LOG:MEM “USBA”
Query Format MEASure:LOGger:MEMory?
Returned Data Format <cr>
Query Example MEAS:LOG:MEMory?
USBA
Query Format MEASure:LOGger:MEMory:CATalog?
Description Returns the catalog of available memory names.
Returned Data Format <cr>
Query Example MEAS:LOG:CAT?
RAM, USBA
Command Syntax MEASure:LOGger:RATE
Description Sets the frequency at which the logging process will take
measurements.
Parameters Frequency in Hz. Range is 1 Hz through 10 Hz.
Parameter Format <nr1>
Example MEAS:LOG:RATE 5
Query Format MEASure:LOGger:RATE?
Returned Data Format <nr1>
Query Example MEAS:LOG:RATE?
5