Pacific Power Source 3120AFX, Operation Manual

Page: 139 / 274

AFX SERIES® OPERATION MANUAL
SECTION 8: REMOTE PROGRAMMING
Entire Contents Copyright

2016 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 139 of 274
Command Syntax CALibrate:COEFFicients:GAIN:CURRent[:AC] <cr>
Description Loads values measured with an external shunt and DVM for calibration
of AC current metering.
The first 3 values are currents measured at the output of the power
source for each phase.
Parameters External reference current reading
Parameter Format n/a
Example n/a
Query Format No
Returned Data Format n/a
Query Example n/a
Command Syntax CALibrate:COEFFicients:GAIN:VOLTage:DC <cr>
Description Loads values measured with an external DVM for calibration of DC
voltage output and metering.
The first 3 values are Voltages measured at the output relay of the
power source for each phase.
The second set of 3 values are Voltages measured at the EXTernal
Sense point (at the load) for each phase
Parameters None
Parameter Format n/a
Example n/a
Command Syntax CALibrate:COEFFicients:GAIN:CURRent:DC <cr>
Description Loads values measured with an external shunt and DVM for calibration
of DC current metering.
The first 3 values are currents measured at the output of the power
source for each phase.
Parameters None
Parameter Format n/a
Example n/a
Command Syntax CALibrate:RESET
Description Clears all calibration coefficients. Sending this command resets all
calibration factors to defaults. After sending this command,
programming and metering remains functional and will still meet spec.
Parameters None
Parameter Format n/a
Example CAL:RESET
Query Format CALibrate:COEFFicients:ALL?
Description Returns all eighteen calibration factors as a comma delimited list.
Returned Data Format <nr1>,…,<nr1>
Query Example CAL:FACT:ALL?
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0