10400455-002
©2008-14 Overland Storage, Inc.
58
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
4 – Network Settings
The following page shows the
bonding options
available from the drop-down list:
When changing the bond type, depending on the type of change, the following requirements
must be met:
•
If changing the Storage network between Failover and ALB, the cluster must reboot.
•
If changing the Storage network to or from Switch Trunking or Link Aggregation
(802.3ad), the cluster must be shut down completely, the Storage network switches
reconfigured to the new bond type, and then all nodes restarted.
CAUTION:
If you change the bonding mode from the default Failover to ALB, Switch Trunking, or
Link Aggregation (802.3ad), you MUST re-cable the Storage network ports on each node to the
same switch. You CANNOT straddle them across two Storage network switches like you do for Failover.
