10400455-002
©2008-14 Overland Storage, Inc.
131
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
5 – Storage Options
It is recommended that you click the
Click here
option at the lower left to automatically
add IP addresses based on the addresses being currently used.
NOTE: When more new nodes are being added to the cluster than there are unused IP
addresses in the node address pool, more IP addresses must be added to the pool.
You can also enter a starting address in the Populate field based on the static IP
addresses (in the list on the right) currently being used by your SnapScale cluster, and
then click the
Populate Static IP Addresses
button.
5.
At Wizard Step 3, verify the data and click
Add Nodes to SnapScale
.
