Overland Storage SnapScale Administrator'S Manual Download Page 88

Page: 88 / 290

10400455-002



SnapScale/RAINcloudOS 4.1 Administrator’s Guide

5 – Storage Options

Snapshot Limitations

•

All snapshots are deleted when:

•

New peer sets are automatically created when new drives are installed.

•

One or more new nodes are added to a cluster.

•

If a complete peer set fails.

•

A Snapshot may be deleted if:

•

Any peer set member drive runs out of snapshot space.

•

A second member of a peer set (containing

unique

snapshot data) fails, even though

the main file system data may still be healthy.

Peer Sets Page

The following table details the items listed on this page:

Option

Description

# Peer Sets

(above table, left)

Displays the total number (#) of peer sets configured and
shown in the table.

Data Replication Count

(above table, left)

Displays the cluster-wide replication count and links to the
SnapScale Properties page.

Summary of Contents for SnapScale



































































































































































































































































































Search results

Summary of Contents for SnapScale

Reviews:

Related manuals for SnapScale

Brands by name

Popular brands

Overland Storage SnapScale, Administrator'S Manual

Search results

Summary of Contents for SnapScale

Reviews:

Related manuals for SnapScale

Brands by name

Popular brands