10400455-002
©2008-14 Overland Storage, Inc.
27
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
2 - Initial Setup and Configuration
Step 4 – Configure Node Static IP Addresses
A SnapScale cluster requires a set of static IP addresses: one for each node, and one for the
Management IP. Use this page to specify the static IP addresses for each of your nodes and for
the SnapScale Management IP address used to access the Web Management Interface for this
cluster.
These IP addresses must all be located on the same subnet. They are automatically assigned
to your nodes when the SnapScale cluster is created.
