10400455-002
©2008-14 Overland Storage, Inc.
132
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
5 – Storage Options
6.
At the confirmation page, click
Add Nodes to SnapScale
again.
The new nodes are added to the cluster and the peer sets are built. This process takes
several minutes.
IMPORTANT: If the Storage network bond type on the new nodes needs to be changed
to or from Switch Trunking or Link Aggregation (802.3ad) to match the cluster bond type,
an additional step is shown after shutting down the node so you can reconfigure the network
switch and restart the node. You can also cancel the adding of the nodes if desired. However,
if no action is taken in the first hour, after that time the adding of the nodes is automatically
canceled.
