Orban Optimod-AM 9400, Operating Manual, Page: 116 / 295

2-64
INSTALLATION ORBAN MODEL 9400
2. Launch an existing Windows 2000 Direct connection.
Once you have set up a “connection” specifying Direct Connect in the 9400 PC
Remote application (see
To set up a new connection on page 3-61), choosing this
connection from 9400 PC Remote automatically opens a Windows Direct Connec-
tion to your 9400.
You can connect by selecting
the desired connection from
the drop-down list in the
C
ONNECT
menu.
You can also connect by dou-
ble-clicking the connection in
the “Connection List” window.
A dialog bubble will appear
on the bottom right hand cor-
ner of the screen verifying
your connection if the connec-
tion is successful.
If you have trouble making a connection, refer to OS Specific Troubleshooting
Advice: Troubleshooting Windows 2000 Direct Connect on page 5-9. If you have
trouble the first time after creating a connection according to the instructions
above, try restarting your computer to clear its serial port.
3. To change the properties of an existing connection:
Right-click the connection in the “connection List” window and choose “Proper-
ties.” The “Connection properties” window opens (see page 2-60).
Connecting Using Windows XP Direct Serial Connection
If you have already configured your direct serial cable connection, skip to step
2
on
page 2-
68
.
If you cannot access the Internet after making a Direct or Modem con-
nection, you will have to reconfigure certain networking parameters in
Windows. Please see
You Cannot Access the Internet After Making a Di-
rect or Modem Connection of the 9400 on page 5-8.
1. Add and configure a Direct Connection for Windows XP:
A) Create a New Windows XP Direct Con-
nection:
a) Launch 9400 PC Remote.
b) Choose “Connect / New 9400”