Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 64 / 114

58 Acme Packet 4500 Hardware Installation and Maintenance Guide
SYSTEM INSTALLATION
3. Insert the RJ45 connector on the end of the console cable into the console port
labeled
Console . The release tab on the RJ45 jack clicks into place when you
insert it properly.
Figure 4 - 78. Rear Panel Console Port
4. Lead the console cable neatly away from the rear panel toward a terminal server
or other component where this serial connection terminates.
The following figure shows a Acme Packet 4500 with a console cable properly
connected (in addition to the Alarm cable).
Figure 4 - 79. Console Cable Connected
Front Panel Console
Cabling Procedure
This section explains how to create a serial connection to the Acme Packet 4500 front
panel console port.
Refer to the Startup chapter of this guide for information on how to configure your
terminal application to connect to the console.