Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 49 / 114

SYSTEM INSTALLATION
Acme Packet 4500 Hardware Installation and Maintenance Guide 43
2. Expand and align the unpainted side of the stationary rail on the outside of the
rear rack rail at the same height used for the front mount point.
Figure 4 - 48. Aligning the Stationary Rail with the Equipment Rack
3. Place one 10-32 screw through the stationary rail ear and screw it in place.
4. Repeat Step 3 for the other mounting point.
Figure 4 - 49. Attached Stationary Rail
5. Repeat this procedure for the rear of the other stationary slide.
A stationary rail with slide extender installed in an equipment rack is shown
below.
Figure 4 - 50. Stationary Slide with Slide Extender Attached to Rack