Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 100 / 114

94 Acme Packet 4500 Hardware Installation and Maintenance Guide
MAINTENANCE
Power Supply Alarms The following table lists the power supply alarms.
Table 6 - 12. Power Supply Alarms
Alarm Alarm ID Alarm Severity Causes Log Message
PLD POWER A
FAILURE 65540 MINOR Power supply A
has failed. Back Power
Supply A has
failed!
PLD POWER A
UP 65541 MINOR Power supply A is
now present and
functioning. Back Power
Supply A is
present!
PLD POWER B
FAILURE 65542 MINOR Power supply B
has failed. Back Power
Supply B has
failed!
PLD POWER B
UP 65543 MINOR Power supply B is
now present and
functioning. Back Power
Supply B is
present!
Voltage Alarms The following table lists the voltage alarms.
Table 6 - 13. Voltage Alarms
Alarm Alarm ID Alarm Severity Log Message
PLD VOLTAGE
ALARM 2P5V
(2.5 Volt Rail) 65544 MINOR
EMERGENCY • Voltage 2.5V CPU has minor alarm
• Voltage 2.5V CPU has emergency alarm, the
system should shutdown
PLD VOLTAGE
ALARM 3P3V
(3.3 Volt Rail)
65545 MINOR
EMERGENCY • Voltage 3.3V has minor alarm
• Voltage 3.3V has emergency alarm, the
system should shutdown
PLD VOLTAGE
ALARM 5V
(5 Volt Rail)
65546 MINOR
EMERGENCY • Voltage 5V has minor alarm
• Voltage 5V has emergency alarm, the system
should shutdown
PLD VOLTAGE
ALARM CPU
(Host Voltage)
65547 MINOR
EMERGENCY • Voltage CPU has minor alarm
• Voltage CPU has emergency alarm, the
system should shutdown
NIU Card Alarms The following table lists the NIU card alarms. PHY0 and PHY1 are both located on
the same NIU. PHY0 encompasses S0P0 and S0P1, while PHY1 encompasses S1P0
and S1P1. Therefore, both insertion and both removal alarms will be activated at the
same time when the NIU is inserted or removed from the Acme Packet 4500.
Table 6 - 14. NIU Card Alarms
Alarm Alarm ID Alarm Severity Cause(s) Log Message
PHY0 Removed 65550 MAJOR NIU S0Px was
removed physical interface
card 0 has been
removed
PHY0 Inserted 65552 MAJOR NIU S0Px was
inserted None