Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 61 / 114

SYSTEM INSTALLATION
Acme Packet 4500 Hardware Installation and Maintenance Guide 55
3. While holding the cage clamp open with the screwdriver, insert the red lead into
the topmost power terminal until only the insulation shows.
Figure 4 - 73. Inserting the Red Lead
4. Repeat Steps 2 and 3, with the white lead inserted into the middle terminal and
the black lead inserted into the lower terminal.
Figure 4 - 74. Inserting the Red and White Leads
Figure 4 - 75. Red, White and Black Leads Inserted
5. Once the DC power supply is inserted into the chassis, route the DC power cord
through your rack and cabling system to the -48 VDC power supply.
6. Connect the supply leads of the DC power cord to the DC power supply.