Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 99 / 114

Table 6 - 9. Hardware Temperature Alarm
Alarm Name
Alarm
ID
Alarm Severity Causes
Example Log
Message Graphic Display
Window Message
TEMPERATURE
HIGH 65538 CRITICAL: >105°C
MINOR: >95°C
Fans are
obstructed or
stopped. The room
is abnormally hot. Temperature:
XX.XXC
(where XX.XX is the
temperature in
degrees) Temperature X C
(where X is the
temperature in
degrees)
If this alarm occurs, the Acme Packet 4500 turns the fan speed up to the fastest possible speed.
MAINTENANCE
Acme Packet 4500 Hardware Installation and Maintenance Guide 93
Fan Speed Alarm The following table lists the fan speed alarm.
Table 6 - 10. Fan Speed Alarm
Alarm Name
Alarm
ID
Alarm Severity Causes
Example Log
Message Graphic Display
Window Message
FAN STOPPED 65537 CRITICAL: any fan speed is
<50%. Or speed of two or more
fans is >50% and <75%.
MINOR: speed of one fan> 75%
and <90%, the other two fans
are at normal speed
Fan failure. Fan speed: XXXX
XXXX XXXX
where xxxx xxxx
xxxx is the
Revolutions per
Minute (RPM) of
each fan on the fan
module Fan stopped
If this alarm occurs, the Acme Packet 4500 turns the fan speed up to the fastest possible speed.
Environmental Sensor
Alarm The following table lists the environmental sensor alarm.
Table 6 - 11. Environmental Sensor Alarm
Alarm Name
Alarm
ID
Alarm Severity Cause(s)
Example Log
Message Graphic Display
Window Message
ENVIRONMENTAL
SENSOR FAILURE 65539 CRITICAL The environmental
sensor component
cannot detect fan
speed and
temperature. Hardware monitor
failure! Unable to
monitor fan speed
and temperature! HW Monitor Fail
MAJOR: >100°C
MAJOR: speed of two or more
fans is > 75% and < 90%. Or
speed of one fan is >50% and
<75% and the other two fans
are at normal speed.