Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 54 / 114

48 Acme Packet 4500 Hardware Installation and Maintenance Guide
SYSTEM INSTALLATION
3. Push the Acme Packet 4500 fully into the equipment rack.
Figure 4 - 61. Installing the Chassis into the Equipment Rack
4. Align the chassis-mounted thumbscrews with the threads on the mounting
spacer. You may have to adjust the spacer locations before they align with the
Acme Packet 4500 captive screws.
5. Once correctly positioned, screw the thumbscrews into the mounting spacer
and secure the chassis in the rack.
6. Fully tighten all 4, 10-32 x 5/8” front screws that hold the stationary rails to the
rack.
Center-Mount 2-Post Chassis Installation
The following sections explain how to mount your Acme Packet 4500 in a center-
mount, 2-post equipment rack. The Acme Packet 4500 in a center mount installation
is pictured below.
Figure 4 - 62. Center-Mounted Chassis
Installing the
Center-mount
Hardware
Center mounting ears are attached to each side of the Acme Packet 4500. These
mounting ears are reversible, and are not mated to a specific side of the chassis.
While the Acme Packet 4500 is shipped with all mounting hardware for attaching
the rack ears to the chassis, you must obtain and use the appropriate hardware
recommended by the equipment rack manufacturer for mounting the system in the
rack.
To install your Acme Packet 4500 in a center-mount configuration:
1. Locate the following components:
•
2 x center-mounting ears
• 6 x 10-32 x 5/16" flat head (black) screws