Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 72 / 114

66 Acme Packet 4500 Hardware Installation and Maintenance Guide
STARTUP
3. If the Acme Packet 4500 is already powered on, press the Enter key a few times
to activate the console connection. When ACLI text is displayed on the screen,
the console connection has been successfully created.
4. If you have created the console connection before powering up the Acme Packet
4500, you can watch the boot process as it displays on your screen.
Powering On the Acme Packet 4500
This section explains how to power on your Acme Packet 4500.
To power on the Acme Packet 4500 hardware:
1. Refer to the Component Overview chapter of this guide to learn how to connect
your Acme Packet 4500 to either AC or DC power.
2. Flip the power supply switches on the rear panel of the Acme Packet 4500 to the
ON position by pressing the 1 side of the switch. When operating with
redundant power supplies, both power switches must be switched to the ON
position either simultaneously or within a few seconds of each other. If the
second power supply is switched on long enough after the first, an alarm is
generated.
Figure 5 - 92. Power Switches (OFF Position)
3. The graphic display on the front control panel will begin to display information.
Initial Log on
Once you have established the console connection, powered on the Acme Packet
4500, and a runtime image has been loaded, you are ready to log in and begin
configuring the system. After the Acme Packet 4500 has initialized, the ACLI login
prompt appears in your terminal application as follows:
User Access Verification
Password:
If the Acme Packet 4500 completed booting before you connected to the console
port, press the <Enter> key on the console keyboard a few times to activate the
console connection.
System access in the following procedure uses the default user and superuser
passwords. If you do not have the default passwords, please send an E-mail to
tac@acmepacket.com .