Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 55 / 114

SYSTEM INSTALLATION
Acme Packet 4500 Hardware Installation and Maintenance Guide 49
2. Line up one chassis ear with the tapped holes as shown in the following image.
The three screw holes will only align with the ear in one direction.
Figure 4 - 63. Tapped Holes in Chassis for Center Mounting the Chassis
3. Use 3 x 10-32 x 5/16" flat head (black) screws to secure the chassis ear to the
chassis. Final installation resembles the image below.
Figure 4 - 64. Center Mounting Ears Attached to the Acme Packet 4500
4. Repeat this procedure for the other side of the Acme Packet 4500 chassis.
Installing the Chassis
in the Rack Lift the Acme Packet 4500 and install it into the rack according to the following
procedure. To prevent personal injury or damage to the Acme Packet 4500, follow
these guidelines:
• This installation requires two people and should not be attempted otherwise.
•
Follow your organization’s best practices for lifting and installing heavy
components into an equipment rack.
•
Ensure that the Acme Packet 4500 chassis remains supported until you have
completely installed it into the equipment rack.
To install the Acme Packet 4500 chassis into an equipment rack:
1. Locate the following components:
•
4 x equipment rack screws
2. Lift the Acme Packet 4500 into the correct position in the equipment rack.