MAINTENANCE
Acme Packet 4500 Hardware Installation and Maintenance Guide
81
5.
Set the fan module aside on an ESD anti-static surface.
Replacing the Fan
Module
To obtain a replacement fan module, contact your Acme Packet customer support
representative directly or E-mail [email protected].
Replacing the fan module is the reverse process as removing it.
To replace the fan module:
1.
Note that the power connector should be on the lower side of the module when
inserted into the Acme Packet 4500 chassis.
Figure 6 - 108. Fan Module Power Connector
2.
Note the chassis-side power connector and threads where you will connect and
secure the fan module.
Figure 6 - 109. Attachment Points For Fan Module
3.
Holding the pull tab on the fan module, insert the fan module squarely into the
chassis. Continue to push the fan module into the Acme Packet 4500 until its
panel lies flush with the Acme Packet 4500 rear panel. You will feel the module
connector secure itself to the motherboard.
Figure 6 - 110. Re-Installing the Fan Module by Pushing on the Pull Tab
Summary of Contents for Acme Packet 4500
