Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 84 / 114

78 Acme Packet 4500 Hardware Installation and Maintenance Guide
MAINTENANCE
You can first perform the DC Power Cord Installation procedure prior to installing a
DC power supply as extra leverage and space will be helpful for performing this task.
If this ordering is used, DO NOT connect the supply end of the power cord to the
power source before the power supply is installed in the Acme Packet 4500 chassis.
Ground yourself with an ESD wrist strap before installing a power supply.
To install a power supply in the Acme Packet 4500 chassis:
1. Locate the power supply.
2. Locate the empty power supply bay in the chassis.
Figure 6 - 100. Power Supply B Removed
3. Insert the power supply into the power supply bay located on the rear panel of
the Acme Packet 4500 chassis in the orientation shown below.
Figure 6 - 101. Re-Installing Power Supply B