OPTIMUM
M A S C H I N E N - G E R M A N Y
808D
Page 339
Create Part Program Part 2
Brief instruction 808D Milling
Operating and Programming — Milling
Basic Theory
After opening the contour data setting window, please make the following settings:
Enter appropriate
coordinates based on the
data from the technical
drawing.
After completing the steps, the system will return to the
edit interface. Press “Technical interface” on the PPU to
return to the interface for setting the cycle data.
After finishing the parameter settings of CYCLE72,
press the ”OK” SK on the PPU to insert the
corresponding cycles in the main program.
After all the settings take effect, the selected cycle and set data will be transferred to
corresponding part program automatically
(for further information, see next page).
