OPTIMUM
M A S C H I N E N - G E R M A N Y
808D
Page 318
Operating and Programming — Milling
Workpiece Setup
Brief instruction 808D Milling
Workpiece Setup
Description
This unit describes how to set the workpiece offset and test the tool results.
Content
SEQUENCE
End
A tool must have been loaded into the spindle.
Press the “Machine” key on the PPU
Press the “JOG” key on the MCP
Before measuring, the spindle can be started as follows:
Press the “T.S.M” SK on the PPU.
Enter “500” at “Spindle speed”
Select “M3” using the “Select” key on the PPU
Press the “CYCLE START” key on the MCP
Manual
start
spindle
T,S,M
T,S,M
Tool change
Spindle speed
Spindle direction
Activate zerooffset
Other M function
rpm
Back
Sett.
Meas.
tool
Meas.
work.
Set
rel
Face
cutt.
Press ´CYCLE START´
to activate above functions.
500
M3
