OPTIMUM
M A S C H I N E N - G E R M A N Y
808D
Page 313
Tool Setup
Brief instruction 808D Milling
Operating and Programming — Milling
SEQUENCE
The tool are usually loaded manually into the spindle.
The tool will be automatically loaded into the spindle with an automatic tool changer.
Make sure there is no obstruction when moving
the tool to avoid a crash.
A handwheel can control the axis motion instead of the “JOG” button.
Press the “Machine” key on the PPU
Press the “Handwheel” key on the MCP
Select the axis you want to move with the
appropriate keys. on the MCP
Under “WCS” or
“MCS” state, a handwheel will be shown beside
the axis symbols, showing the axis is chosen,
and can be controlled with a handwheel.
Move
machine with
handwheel
Select the required override increment
according to the buttons on the right(this
selection fits all axes)
The handwheel increment is “0.001 mm”
The handwheel increment is “0.010 mm”
The handwheel increment is “0.100 mm”
The selected axis can now be moved with the handwheel.
Press “JOG” on MCP to end the function of
“Handwheel”.
Notes: If set the MD14512[16]=80, the system will deactivate the function of
MCP for selecting the axis of handwheel, the user will have to activate
“Handwheel” function with PPU softkey.
Select the required axis on
the right of the PPU; the
selected axis is shown with a
√
Handwheel
Handwheel
Axis
Number
